Issue link: https://toolbox.igus.com/i/1197870
132 ig us i g u s i gu s i gu s ig u s i g u s igu s i g us igus i gus igus igu s ig u s i g u s i g u s i g us i g us igu s i g u s igu s ig us ig us igus igus igus igus i g us ig u s igus i gu s ig u s igu s igus ig u s igu s i g us ig us igu s i gu s ig u s ig u s ig us i g u s i g u s igus ig u s ig us igus igus i g u s i g u s i g us i gu s ig u s ig us ig u s igus igu s igus i g us ig u s i gu s i g us i g u s igus i gus ig u s ig u s igus ig u s i g us igu s ig u s i gu s i g us ig u s igus igu s igus igu s i g u s i g u s i g us ig us ig u s ig u s ig u s igus ig u s i g us i g u s ig us Technical data - rotary motion RBR Max. angle of rotation 540° More upon request v max. 2 m/s Depending on the application, please check with igus ® a max. 20 m/s 2 Depending on the application, please check with igus ® Rotary motion RBR End of travel Rotating We recommend pivoting mounting brackets for most applications with rotary motion with RBR Standard E2/000 e-chain ® , angle of rotation 225° Rotary motion with RBR RBR (Reverse Bend Radius) means that the e-chain ® can bend in two directions. Most igus ® e-chains ® can be used in RBR designs, with the exception of some bend radii, for the e-tubes R117 to R9850 and for the series 07, 09, 14, 15 and 17. The RBR does not necessarily need to be identical to the normal bend radius R of an e-chain ® . For example, Part No. E4.32.15.100/425.0, describes series E4.32 e-chain ® with an inner width of 150 mm, standard bend radius of R = 100 mm and RBR of 425 mm. Most rotary motion can be achieved with an RBR option. Angles of rotation up to 540° have been achieved. Please consult igus ® for your particular application. Rotary movements require less installation height. The e-chains ® glide mostly on surfaces made of polymer, stainless steel (1.4301 material) or steel and are guided through channels in the rotary movement. See side mounted for further design tips. Bend radius, circular radius and e-chain ® width are variable with this product line. Rotary motion with standard e-chains ® The photo to the left shows an application which was developed using standard e-chains ® . Such solutions are possible if space is available and if the angles of rotation are limited to a maximum of 450°. All igus ® e-chains ® , e-tubes and chainflex ® cables are appropriate for this situation. RBR-rotary movement with igus ® system E4, installed on a crane Rotary motion with a standard igus ® e-chain ® Rotary motion of 180° with a standard e-chain ® on a crane turret drive Stationary part More information www.igus.com/rbr-configurator